reamers

It's the actual bits, drills, tap, reamers, endmills, boring bars, guage pins, and thousands of other tools that would need to be purchased by machine shops to get the work done.

NASA Finds The Metric System Too Hard To Implement for Constellation - NASA Watch 2009

Slam Bang (SB) had wore out reamers and all three ended up having out of round chambers.

Some Peeves from a Gunsmith 2009

Slam Bang (SB) had wore out reamers and all three ended up having out of round chambers.

Some Peeves from a Gunsmith 2009

It's the actual bits, drills, tap, reamers, endmills, boring bars, guage pins, and thousands of other tools that would need to be purchased by machine shops to get the work done.

NASA Finds The Metric System Too Hard To Implement for Constellation - NASA Watch 2009

As far as I know now there are no reamers marked as "338 Federal", though as far as I know Federal has made no changes to the old wildcat other than the name.

The .338 Federal: A rare moment of sanity, cartridge-wise 2006

I had a 338 Federal built on a m-98 mauser action as soon as reamers became available.

The .338 Federal: A rare moment of sanity, cartridge-wise 2006

If it has not been possible to include the demonstration of the action of reamers in the instructions, this should be done right now before the exercises in the workshop begin.

1. Objectives and contents of practical vocational training in the working technique of “Manual Reaming” 1990

If it is quite clear that the exercises will be carried out by standardised reamers according to the “ISA system of tolerances and fits”, the respective sections should be taught on the basis of the

1. Objectives and contents of practical vocational training in the working technique of “Manual Reaming” 1990

What is the effect of using straight-fluted reamers when reaming a hole with feather keyway?

1. Objectives and contents of practical vocational training in the working technique of “Manual Reaming” 1990

Instruction in the main subjects of “purpose of reaming; tools; design and action of reamers” is to be heavily supported by all those teaching aids available.

1. Objectives and contents of practical vocational training in the working technique of “Manual Reaming” 1990