Definitions
Sorry, no definitions found. Check out and contribute to the discussion of this word!
Etymologies
Sorry, no etymologies found.
Support
Help support Wordnik (and make this page ad-free) by adopting the word clearing-out.
Examples
-
With Communism these limitations do not exist, and the weapons which they have employed have not been the weapons of modern warfare: they have used them only in the clearing-out process.
-
After that clearing-out process they were able to breath much more freely.
How and When to Be Your Own Doctor Isabel Moser
-
In order to reach the other clearing-out drop the ringing current must pass through the two 1-microfarad condensers in series, this making in effect only 1/2-microfarad.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
The clearing-out drop _C. O._ is bridged permanently across the strands _6-7_ of the cord, but is without function at this time; the fact that it is wound to a high resistance and impedance prevents its having a harmful effect on the transmission.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
Recently there has been a growing tendency on the part of some manufacturers to control their clearing-out signals by means of relays associated with cord circuits, these signals sometimes being ordinary clearing-out drops and sometimes incandescent lamps.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
Another contact operated by the relay closes the circuit of a low-wound clearing-out drop placed across the line, thus bridging it across the line.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
A modification of this arrangement is shown in Fig. 285, wherein a double-wound clearing-out drop is used, and a 1/2-microfarad condenser is placed in series in each side of the cord circuit between the winding connections of the clearing-out drop.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
The relay is restored or unlocked and the clearing-out drop disconnected from the cord circuit by means of a key which opens the locking circuit of the relay.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
Obviously, an open circuit in the line will not prevent the clearing-out signal being received.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
-
For instance, if a long bridging line be connected with one end of this cord circuit and a short line having a low-resistance series ringer be connected with the other end, then a station on the long line may have some difficulty in throwing the clearing-out drop, because of the low-resistance shunt that is placed around it through the short line and the low-resistance ringer.
Cyclopedia of Telephony & Telegraphy Vol. 1 A General Reference Work on Telephony, etc. etc. George Patterson 1910
Comments
Log in or sign up to get involved in the conversation. It's quick and easy.