countersinks

Seems to me like this would be a whole lot easier with some sort of sticky Velcro solution or something similar instead of having to screw around with the drilling and countersinks and what have you.

Turn A Cheap iPhone Case Into A Tripod | Lifehacker Australia 2009

These drilling machines are applied to manufacture single vertical round bores for mountings and countersinks at screw holes for mountings or single dowel bits.

2. Construction of Selected Drilling Machines Frank Wenghfer 1993

What are the advantages of step countersinks and combination countersinks?

8. Counterboring/countersinking with counterbore/countersink and turning tool Detlef Krechlok 1990

The directions which are binding on the safe handling of drills, countersinks and reamers should be repeated as they apply to the techniques of pinning.

1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints 1990

Why is the counterboring/countersinking technique on the lathe with special counterbores/countersinks of minor importance?

8. Counterboring/countersinking with counterbore/countersink and turning tool Detlef Krechlok 1990

Counterboring/countersinking on the lathe with special counter-bores/countersinks is of minor importance.

8. Counterboring/countersinking with counterbore/countersink and turning tool Detlef Krechlok 1990

“Q” (Locksmith's hammers, light metal hammers, non-ferrous metal punches and drifts, drills, countersinks, reamers, clamping devices and supports.) 13.

1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints 1990

The directions which are binding on the safe handling of drills, countersinks and reamers should be repeated as they apply to the techniques of fitting.

1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of “Fitting” 1990

· Drills, cylindrical and taper reamers, countersinks, triangular scrapers

1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints 1990

The details of the safe handling of drills, countersinks and thread cutting dies will be explained.

1. Objectives and Contents of the Practical Training in the Techniques of Making Threaded Joints 1990