current-limiting love

current-limiting

Definitions

Sorry, no definitions found. Check out and contribute to the discussion of this word!

Etymologies

Sorry, no etymologies found.

Support

Help support Wordnik (and make this page ad-free) by adopting the word current-limiting.

Examples

  • Thus, the movable contact member 4 is pushed off at high speed and an arc with current-limiting effect is brought into the circuit.

    3. Low-voltage circuit breakers Ernst-Otto Balding 1991

  • Therefore, bus-bar systems, heavy-duty windings in transformers and current-limiting reactors must be mechanically stiffened and reliably fastened, taking a high safety factor into account.

    5. Magnetic Field 1991

  • Framework with ignition current-limiting resistors, evacuated internal space.

    12. Answers to the Questions for Repetition and Knowledge Tests Frank Ponemunski 1991

  • Starter ignition sets, in their essence, consist of a special glow starter with a current-limiting capacitor and, perhaps, a protective resistor connected in series, by which - including the inductivity of the ballast - the required glitches from 1.5 to 2.5 kV are generated in the form of irregular pulses.

    6. Operating Components for Discharge Lamps Frank Ponemunski 1991

  • The load switch's very tight 0.4A current-limiting tolerance means power rail current requirements can be reduced along with overall system cost.

    unknown title 2011

  • The board received 5V of power from an external source, and some current-limiting resistors on the panel biased the LEDs.

    Engineering Hardware-Software 2010

  • The board received 5V of power from an external source, and some current-limiting resistors on the panel biased the LEDs.

    Engineering Hardware-Software 2010

  • The board received 5V of power from an external source, and some current-limiting resistors on the panel biased the LEDs.

    Engineering Hardware-Software 2010

  • The board received 5V of power from an external source, and some current-limiting resistors on the panel biased the LEDs.

    Engineering Hardware-Software 2010

  • The board received 5V of power from an external source, and some current-limiting resistors on the panel biased the LEDs.

    Engineering Hardware-Software 2010

Comments

Log in or sign up to get involved in the conversation. It's quick and easy.