deburr

I deburr everything and maybe it helps, sure does not hurt anything plus I feel like I am into performance improvement when I take that extra step.

Guys around here swear Norma brass is far superior to Fed, Rem, Win. insofar as number of times you can reload it. 2009

I deburr everything and maybe it helps, sure does not hurt anything plus I feel like I am into performance improvement when I take that extra step.

Guys around here swear Norma brass is far superior to Fed, Rem, Win. insofar as number of times you can reload it. 2009

- Unclamp or remove the workpiece, deburr the cut edges and clean the workpiece.

4. Milling of grooves Dieter Frank 1990

- Unclamp the workpiece, deburr the cutting edges and clean, control size accuracy and angularity.

4. Milling of end faces Dieter Frank 1990

- Unclamp or remove the workpiece, deburr the cut edges and clean the workpiece.

5. Milling of elongated slots Dieter Frank 1990

What type of countersink will you use to deburr a bore hole?

6. The Technological Steps of Making Pinned Joints Frank Wenghfer 1990

Re-thread, then loosen the clamping screw and deburr the pipe.

9. The Technological Steps of Making Threaded Joints Frank Wenghfer 1990

- Unclamp or remove the workpiece, deburr the cut edges and clean the workpiece.

6. Milling of break-throughs Dieter Frank 1990

Having completed the thread, deburr all sharp edges with a finishing file.

5. Thread cutting by dies on recessed cylindrical workplaces Horst Kth 1990

For use on straight and curved external faces and on side edges to provide them with chamfers and to deburr edges.

2. Filing tools Frank Wenghfer 1990