deburred

Sometimes it is amazing how much brass falls out of that deburred case.

Guys around here swear Norma brass is far superior to Fed, Rem, Win. insofar as number of times you can reload it. 2009

Sometimes it is amazing how much brass falls out of that deburred case.

Guys around here swear Norma brass is far superior to Fed, Rem, Win. insofar as number of times you can reload it. 2009

All loads used the Federal 210 Match primer, and all cases were given full prep (uniformly trimmed, flash hole deburred, etc.) prior to loading.

The .338 Federal: A rare moment of sanity, cartridge-wise 2006

Bores are to be deburred properly by a countersink or bigsize drill.

1. Protective measures against too high a contact voltage and conduct following electrical accidents Werner Boschitsch 1991

Processed ends of hot-dip galvanized strip steel are to be deburred by filing.

1. Protective measures against too high a contact voltage and conduct following electrical accidents Werner Boschitsch 1991

The edges of the mounting holes must be well deburred.

4. Low-voltage switchgear and distribution systems Werner Boschitsch 1991

The sawed off surfaces of bus bars are to be deburred.

4. Low-voltage switchgear and distribution systems Werner Boschitsch 1991

After having been given an angle by grinding the scraper must be deburred on an oiled whetstone, so that it remains sharp for a longer time and does not become dull too soon.

2. Tools for scraping Frank Wenghfer 1990

Why must workpieces, on principle, be deburred after they have been machined?

5. Setting and operation of shaping machines Horst Kth 1990

Chuck the pipe, apply cutting fluid to the deburred end of the pipe.

9. The Technological Steps of Making Threaded Joints Frank Wenghfer 1990