demoulding

Take the moulds out and set aside to cool slightly before demoulding the idlis.

Archive 2008-09-01 2008

Take the moulds out and set aside to cool slightly before demoulding the idlis.

Back with Poha Idlis for WBB- Grains in my breakfast 2008

I celebrated their generosity by cleaning a window and demoulding a window ledge.

Even in a little thing gillpolack 2005

- Some roughness on the edges can be tolerated, provided this is due to demoulding and not caused by mishandling.

Chapter 6 1998

Compressed earth blocks (CEBs) are masonry elements, which are small in size and which have regular and verified characteristics obtained by the static or dynamic compression of earth in a humid state followed by immediate demoulding.

Chapter 5 1998

- Some roughness on the edges can be tolerated, whether it is due to demoulding or caused by mishandling.

Chapter 6 1998

The higher the ambient temperature, the more care must be taken to maintain a high degree of relative air humidity for at least one week after demoulding.

Chapter 7 1998

Compression is the operation which consists in compressing the material in a confined space known as a mould using a static or dynamic mode; compression is followed by immediate demoulding, freeing the shaped block.

Chapter 5 1998

Compressed earth blocks (CEBs) are masonry elements, which are small in size and which have regular and verified characteristics obtained by the static or dynamic compression of earth in a humid state followed by immediate demoulding.

Chapter 5 1998

· Some MCR machines are equipped with a demoulding jig, on which the 24 hour old tiles are placed upside down, together with the setting mould, which can be lifted off.

Chapter 3 1997