key-way

Differences in comparison with the fitting key joints are to be found with the fitting in of the key in the key-way of the shaft as well as with the assembly of the individual parts.

6. Technological Processes for Manufacturing Feather Key Joints and Profile Shaft Joints Frank Wenghfer 1990

In such a case the depth of the key-way, at each side wall, is just half the width of the key-way.

Practical Mechanics for Boys J. S. Zerbe

An excellent key-seat rule can be made by filing out two right-angled pieces, as shown in Fig. 49, which can be attached to the ordinary six-inch metal rule, and this will enable you to scribe the line accurately for the key-way on the shaft.

Practical Mechanics for Boys J. S. Zerbe

As a result, in deepening the groove the file will contact with the walls, and you have a key-way too wide for the key.

Practical Mechanics for Boys J. S. Zerbe

It may have a curved end, or be a key-way chisel, or entirely unsuited as to size for the cutting required.

Practical Mechanics for Boys J. S. Zerbe

The dowel-pins steer the key into the key-way across the end of the shaft, and the key compels the block to turn with the shaft.

Steam Turbines A Book of Instruction for the Adjustment and Operation of the Principal Types of this Class of Prime Movers 1902